Wireless DMX512 receiving module 2.4G antenna rod + IPX adapter cable

Description

Home
Arduino
Module
Sensor
Chips
About Us
Wireless DMX512 Receiver
Descriptions:
Small in size easy to suit for interior of accessed lighting.
Single key to operate, tricolor LED displaying.
Transmitting standard DMX512 protocol data of controller,
also can transmit lighting and lighting DMX512 protocol data.
126 channels automatically jumping frequency,
high anti-jamming ability to ensure working reliability.
7 groups ID code settable, user can use 7 groups individual wireless system
without any interference with each other in the same place.
Input voltage: 5VDC
Work frequency section: 2.4GHz ISM band, 126 channels frequency section
Max transmitting power rate: 20dBm
Receiver sensitive: -94dBm
Signal port: RS485 or CPU series port AURT.
Operating manual:
ID code and LED color corresponding correlation:
1:RED
2:GREEN
3:RED+GREED = YELLOW
4:BLUE
5:RED+BLUE = PURPLE
6:GREEN+BLUE = CYAN
7:RED+GREED+BLUE = WHITE
Press key 1 time to indicate ID setting, Press again to set IC, then ID value adding 1 each time by press.
Working condition:
LED constant litght up: no DMX or wireless signal.
Red LED flash: transmitting.
Green LED flash: Receiving
RF frequency------2. 400-2. 525 G, total 126 channels, it is searching automatically.
ID Code-------"1-7" groups ID code, press "key" button for setting,
it only can work under same ID code of transmitter and receiver.
Establishing Communication:
Power on DMX512 wireless received board and transmitted board.
Press "key" button to set same ID value of transmitted board and received board,
please use different ID value if you need use more than 1 group wireless net at same time in same place.
The red LED flashes when transmitter transmits DMX data by no interfered frequency section,
then receiver changes communicated frequency section.
Green LED flash till received corrected same ID value, LED flash faster once DMX data faster.
Communication was established correctly then.
Package Included:
1 x Wireless DMX512 PCB Modules Board LED Controller/Transmitter/Receiver W/ Antenna
2.4G Antenna
Features:
Color: black, silver
Type: Extention cable, 3DBI Gain Antenna
Package Included:
1 X Antenna Extension Cable
1 X 3DBI Gain Antenna
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.