-40%

Multicast sACN (E1.31) to WS2812/2811 Controller Interface 680 Pixels 4 Ports

$ 47.52

Availability: 52 in stock
  • Type: sACN (E1.31) to WS2812/2811 Controller
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • MPN: WS2812
  • Brand: TL
  • Condition: New
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Country/Region of Manufacture: China

    Description

    Multicast sACN (E1.31) to WS2812 Controller WS2811/WS2812B/WS2813 Interface 4 ports Universes Output 680 Pixels 5-24V
    sACN (E1.31) to WS2812 Controller
    4 ports(universes) output up to 680 pixels
    Multicast Format
    Remark: If you plug the controller directly to your computer's ethernet jack, then the controller will be plug and play without any IP setting as it works in Multicast format of sACN (e1.31) protocol.
    Controllable Pixel Types:
    WS2811 / WS2812 / WS2812B / WS2813
    Remark: Pixels of DC5V to DC24V are all compatible with the controller.
    Unit Size: L11.5cm x W9cm x H4 cm ; Package Size: 16x16x6cm ; G.W.: 350g
    Accessories:
    (1) Regulated DC 5V 2A Power Supply -- 1 pc
    (2) One meter length RJ45 network cable -- 1 pc
    Product Brief --
    (1) 4 universes output up to 680 pixels. 170 pixels for each output port(universe).
    (2) Controllable Pixel Types: DC5V-24V WS2811 / WS2812 / WS2812B / WS2813
    (3) Max DC Current Input/Output: 30 Amp. DC Voltage Input/Output: 5V or 24V
    (4) Compatible with any software package that supports the E1.31 (sACN) protocol. For software output setup, just select the E1.31 / sACN / ACN output in Multicast format.
    If you plug the controller directly to your computer's ethernet jack, then the controller will be plug and
    play without any IP setting as it works in Multicast format of sACN (e1.31) protocol.
    The controller's default (DMX) universe number output setting as below --
    (DMX) universe No.1 assgined to Port 1
    (DMX) universe No.2 assgined to Port 2
    (DMX) universe No.3 assgined to Port 3
    (DMX) universe No.4 assgined to Port 4
    You can change/assign/configure different (DMX) universe number to each port such as Universe No.5 to Port 1, Universe No.6 to Port 2, etc...
    And if you connect the controller to your router/switch instead of your computer, you need to set the controller's IP to match your router's range.
    How to open the Configuration Web Page
    Tip: We highly recommend Chrome for configuration page.
    Note: You will not be able to access the E1.31 to DMX configuration web page interface with your browser if the 'WEB' LED indicator is off.
    Connect the controller directly to your computer's RJ45 ethernet Jack, power on the controller and follow below steps:
    (1)
    Push the RESET button to restart the interface, then push and hold the MODE button, after a few seconds, you will see both 'WEB' & 'SIGNAL' LED indicators flash together at a rate of one flash per second. After 3 flashes, release the MODE button!
    (2)
    After a few seconds, the 'WEB' LED Indicator will turn on.
    (3)
    Then go to your web browser(Google Chrome is highly recommended) and type the controller's temporary IP 169.254.74.73 at address bar and hit Enter on your keyboard, you will bring up the configuration web page.
    Note: The web page server doesn’t operate continuously because the controller is only capable of 4 simultaneous internet connections.
    So, although the first 3 ports can be dedicated to receiving pixel dimmer data full-time, the 4th port has to be shared between receiving dimmer data and running the web server.
    When the controller is restarted or powered on, the Port 4 will be reserved for web server for 99 seconds. After 99 seconds, Port 4 will start to receive dimmer data if no web configuration page is opened.
    Configuration Web Page --
    Note:
    Your valid phone number is very important for the shipping,please provide it when you order
    !
    Any customs duty applied to the parcel should be covered by the buyer.
    As has been stated on the eBay item description, Import duties,
    taxes and charges are not included in the item price and shipping charges.
    These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.
    1 X sACN (E1.31) to WS2812 Controller
    1 X Regulated DC 5V 2A Power Supply
    1 X 1 meter RJ45 network cable
    Shipping
    1.Item will be shipped within 3 business days of cleared payment via Post Airmail.
    2.Only shipped to buyer's PayPal address, please confirm your address on PayPal before you bid.
    3.Usually takes 7-20 business days to most Countries: US, Canada, UK, Australia and Europe.
    4.Optionally, Express Shipments with tracking service via EMS/DHL/UPS with a quoted delivery time of 5 to 7 business days is also available .
    Payment
    We ONLY accept Paypal.go to
    paypal
    account
    Any customs duty applied to the parcel should be covered by the buyer.
    eCheque will be held until cleared
    We appreciate prompt payment and look forward to your business in the future.Unpaid item will be filed without receiveing payment in 7 days from listing ended.
    Warranty
    This item is ALL BRAND NEW and in the original factory box and packing,All products have been checked and packaged in good condition before dispatch.
    12 months Manufacture's Warranty for defective items (excluding items damaged and/or misused after receipt)
    Defective items Must BE reported and returned to us within the warranty period(and the original package.).we will give you a return ID.Meanwhile Please tell us what the defect is,to eliminate improper use.
    Return shipping fee be responsible from buyer