E1.31 SACN To DMX Interface Bridge Satge Light Control 4 Way For MagicQ Madrix

Description

E1.31 SACN To DMX Interface Bridge For MagicQ Satge Lighting Control
Features：
E1.31 (sACN) to DMX Interface/Bridge, output up to 4 DMX universes. Compatible with Madrix, MagicQ, Luminair, LSP: Light Show Pro, Vixen, LOR ...
Compatible withanysoftware package that supports theE1.31 (sACN) protocol output. For example, below software supports E1.31 protocol output and works with the E1.31 to DMX Interface. For software output setup, just select the E1.31 / sACN / ACN output
Product Brief
(1) E1.31 (sACN) to DMX Interface/Bridge, output up to 4 DMX universes.
(2) E1.31 to DMX over Ethernet in Mutilcast format, configurable via web browser.
(3) One or more E1.31 to DMX Interfaces with different IP assigned can be used via a
network (LAN) connection to achieve more DMX universes output.
(4) Compatible withanysoftware package that supports theE1.31 (sACN) protocol output. For example, below software supports E1.31 protocol output and works with the E1.31 to DMX Interface. For software output setup, just select the E1.31 / sACN / ACN output type, some softwares will need special plugin such as Vixen...
5 Steps Quick Start Guide
Step (1) Check your package parcel and you will find one E1.31 to DMX Interface, one DC5V power supply, one RJ45 female to female CAT5 cable and 4 RJ45 to DMX output connectors. Besides, there's a small CD-ROM in package as a manual instruction for this interface.
Step (2) Connect the CAT5 cable between your computer's RJ45 Jack (ethernet port) and the interface's input port.
Step (3) Connect your DMX fixtures to the interface's output port.
Step (4) Connect the DC5V power supply with the interface. At initial power up, the 'DMX' LED indicator will flash 2 flashes and the 'WEB' LED indicator will turn on.
Step (5) Open your software application and select the E1.31 , sACN or ACN output type. And the E1.31 to DMX is ready for use. Now you can play with your software and enjoy the interface!
The as-shipped default value of the interface is as below and can be changed / configured via a web browser by the configuration commands.
Default IP: 192.168.1.206
Default output DMX universe No.: RJ45 Jack 1 = Output DMX Universe 1
RJ45 Jack 2 = Output DMX Universe 2
RJ45 Jack 3 = Output DMX Universe 3
RJ45 Jack 4 = Output DMX Universe 4
P.S.: You can assign any universe number to any output RJ45 port via configuration web page, such as Universe 123 to RJ45 Jack 1, Universe 666 to RJ45 Jack 2, …
If you think above default value is good enough for your controlling system, that's it and here you go and play!
1 x E1.31 (sACN) to DMX Interface
Shipping:
1.Item will be shipped within 3 business days of cleared payment via Post Airmail.
2.Only shipped to buyer's PayPal address, please confirm your address on PayPal before you bid.
3.Usually takes 7-20 business days to most Countries: US, Canada, UK, Australia and Europe.
4.Optionally, Express Shipments with tracking service via EMS/DHL/UPS with a quoted delivery time of 5 to 7 business days is also available .
Payment:
We ONLY accept Paypal.go to
paypal
account
eCheque will be held until cleared
We appreciate prompt payment and look forward to your business in the future.Unpaid item will be filed without receiveing payment in 7 days from listing ended.
Warranty:
This item is ALL BRAND NEW and in the original factory box and packing,All products have been checked and packaged in good condition before dispatch.
1 months Manufacture's Warranty for defective items (excluding items damaged and/or misused after receipt)
Defective items Must BE reported and returned to us within the warranty period(and the original package.).we will give you a return ID.Meanwhile Please tell us what the defect is,to eliminate improper use.
Return shipping fee be responsible from buyer