Doug Fleenor Designs PRE10-A 10-Button Wall Mounted DMX Controller

Description

Save up to 10 of your favorite lighting presets in the DMX512 based PRE10-A architectural system from Doug Fleenor Designs. Working in conjunction with a lighting console, presets are captured via programmed output and stored for quick use. With automatic switching, lighting consoles and the PRE10-A can operate independently from one another, holding a look if one unit goes offline or simplifying control when needed. Save lecture hall looks or general stage looks for visiting artists, each preset can be assigned a unique fadetime and simply recalled at the touch of a button.
Features
Records up to 10 Presets
Assign crossfade time from 0 - 999 seconds in length
Solid aluminum, one-gang faceplate
Works in conjunction with lighting console
Connect via power (2 wires) and DMX 512 (3 wires)
Specifications
Connector: Phoenix Contact MSTB series 5 position two part terminal block
Model: MSTB 2,5/5-ST-5,08 Order Number: 17 57 04 8
Connector pin out:
1: DMX512 common
2: DMX512 data -
3: DMX512 data +
4: Supply common (tied to pin1)
5: Supply “hot”
Input/Output circuit: ESD protected EIA-485 transceiver (LT1785)
Indicators: Ten green preset indicator LEDs
One red Lockout / Record LED
User controls: Ten preset push buttons
One recessed record push button
One recessed fade time push button
Option jumpers: Master / Slave mode selection
Previous preset / Hold last look mode selection
Power input: 9 to 15 volts AC or DC / 200mA per station
(A 10 volt class 2 “doorbell” transformer is recommended for fixed installations)
Color: Black anodized with silver engraved nomenclature
Size: Faceplate: 4.5"h X 2.75"w X 0.2"d
Faceplate: rear inset: 4.05"h X 2.4"w X 0.1"d
Electrical box minimum inside dimensions: 3.5"h X 2.1"w X 1.25"d